Spring & Bore Water Supplies

✔ Parameters Tested: E. coli, Total Coliforms, Turbidity
✔ Sampling Frequency: Every 3 months
✔ Rule Reference: AS-SB 5 – Acceptable Solution for Spring and Bore Drinking Water Supplies
✔ Suggested Sampling Point: Treated water leaving at least one end-point treatment system

Please complete the following details:

✔ Parameters Tested: E. coli, Total Coliforms, Nitrate, pH, UV Transmittance (@ 254 nm), Turbidity
✔ Sampling Frequency: Every 3 months
✔ Rule Reference: AS-SB 3(a) – Acceptable Solution for Spring and Bore Drinking Water Supplies
✔ Suggested Sampling Point: Downstream of any pre-treatment system, but before end-point treatment

Please complete the following details:

✔ Parameters Tested: Arsenic, Boron, Silica, Hardness, Iron, Manganese
✔ Sampling Frequency: Every 12 months
✔ Rule Reference: AS-SB 3(b) – Acceptable Solution for Spring and Bore Drinking Water Supplies
✔ Suggested Sampling Point: Downstream of any pre-treatment system, but before end-point

Please complete the following details:

✔ Parameters Tested: E. coli, Total Coliforms, Nitrate, pH, UV Transmittance (@ 254 nm), Turbidity, Arsenic, Boron, Silica, Hardness, Iron, Manganese
✔ Sampling Frequency: Every 12 months
✔ Rule Reference: AS-SB 3(a&b) – Acceptable Solution for Spring and Bore Drinking Water Supplies
✔ Suggested Sampling Point: Downstream of any pre-treatment system, but before end-point

Please complete the following details:

✔ Parameters Tested: E. coli, Total Coliforms, Iron, Manganese, Nitrate, Arsenic, Boron, Silica, Hardness, UV Transmittance (@ 254 nm), Turbidity
✔ Sampling Frequency: At least three samples before implementing the Acceptable Solution, covering different environmental conditions (e.g., heavy rainfall, dry periods).
✔ Rule Reference: SB2.2 – Acceptable Solution for Spring and Bore Drinking Water Supplies
✔ Suggested Sampling Point: Source water intake before any treatment

Please complete the following details: